Anasayfa
Kimyasallar
Analitik Kimyasallar
Asitler
BORIC ACID CRYST. EMPROVE PH EUR,BP,N 50 Kg (Borik Asit Kristal) CAS: 10043-35-3

BORIC ACID CRYST. EMPROVE PH EUR,BP,N 50 Kg (Borik Asit Kristal) CAS: 10043-35-3

Kategori

Asitler

Marka

Merck

Stok Kodu

100160.9050

3 Günde Kargoda

Stok Sorunuz

BORIC ACID CRYST. EMPROVE PH EUR,BP,N 50 Kg (Borik Asit Kristal) CAS: 10043-35-3

CAS #: 10043-35-3 EC Number: 233-139-2 Molar Mass: 61.83 g/mol Chemical Formula: H₃BO₃ Hill Formula: BH₃O₃ Grade: Ph Eur,BP,NF

Description
Catalogue Number	100160
Synonyms	Orthoboric acid, Trihydroxidoboron

Physicochemical Information
Density	1.49 g/cm3 (23 °C)
Melting Point	>1000 °C (decomposition)
pH value	5.1 (1.8 g/l, H₂O, 25 °C)
Vapor pressure	<0.1 hPa (25 °C)
Bulk density	400 - 600 kg/m3
Solubility	49.2 g/l

Toxicological Information
LD 50 oral	LD50 Rat 2660 mg/kg
LD 50 dermal	LD50 Rat > 2000 mg/kg

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H360FD: May damage fertility. May damage the unborn child.
Precautionary Statement(s)	P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P308 + P313: IF exposed or concerned: Get medical advice/ attention. P405: Store locked up. P501: Dispose of contents/ container to an approved waste disposal plant.
Signal Word	Danger
RTECS	ED4550000
Storage class	6.1D Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
WGK	WGK 1 slightly hazardous to water
Disposal	28 Aqueous solutions: Container D.

Safety Information
Categories of danger	toxic for reproduction

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

Specifications
Assay (alkalimetric, calculated on dried substance)	99.5 - 100.5 %
Assay (alkalimetric)	99.0 - 100.5 %
Identity	passes test
Appearance of solution	passes test
Completeness of solution	passes test
Solubility in ethanol	passes test
pH-value (3.3 %, water)	3.8 - 4.8
Sulfate (SO₄)	≤ 0.04 %
Heavy metals (as Pb)	≤ 0.0015 %
As (Arsenic) (*)	≤ 0.001
Organic impurities	passes test
Residual solvents (ICH Q3C)	excluded by manufacturing process
Loss on drying (Silica gel)	≤ 0.5 %
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Corresponds to Ph Eur,BP,NF

Bu ürüne ilk yorumu siz yapın!